When you've got a Nexus that's bigger than Texas, you need a bold case to match! This real wood cover highlights the Huawei Nexus 6P's get-outta-town geometry with Toast's world-famous, laser-cut, could-only-have-been-conceived-by-a-design-brainiac detailing. The luscious hand-rubbed finish gives the sleek wood veneer a fabulous hand feel and lustrous look. But that's not all: we packed this model full of fancy features. First, choose the wood you want for the one-piece back and sides cover (walnut, ebony or ash), then pick a matching or contrasting wood for the back glass inlay panel. We'll match your button covers to your back inlay panel choice for a completely dialed-in look. Add a front panel to really take it to the big time.
Big bonus: the slim veneer attaches directly and securely to your phone with a high-quality adhesive, protecting it from sand and other particulates that commonly damage devices when they become trapped inside a typical phone case. No big whoop to apply: just peel it, line it up with a little care, stick it on and there you have it: big league beauty! Check out the Huawei Nexus 6P installation video on our Installation & Removal page.
Nexus 6P Installation
Watch the toastmaster install an ebony Toast cover with walnut inlay on a Nexus 6P. Includes tips and tricks to get a perfect installation.
Showing reviews 1-10 of 106 | Next
Looks good feels great
Posted by David on 17th Aug 2016
Overall I think it's a beautiful cover. I love the feel of the wood. My only concern it how long the corners are going to last. Everything lined up well but after a few days slight separation occurred on the corners and one of the little square bits came off from normal use of being put in my pocket. Other then that it's really cool.
Thanks for taking the time to review, and so sorry to hear about the corner issue!
Due to the variances in wood (grain, density, etc), the laser intensity must be dialed in accordingly for each sheet of veneer. It's a rare occurrence, but occasionally those laser-scored lines (which enable the wood to wrap the curves) are burned a hair too deep. Each team member performs a Quality Control check at their step of the crafting process, and 99.9% of the time we can tell if they aren't properly cut depthwise, although this becomes apparent shortly after install, as it seems you're experiencing.
Things of this nature are covered under warranty - please email a picture to email@example.com and we'll craft you a replacement cover right away.
Thank you for your understanding, and enjoy your Toasted 6P!
Top notch case
Posted by Sean McSwain on 22nd Jul 2016
Wood case was precisely designed and fits perfectly.Gives the phone a unique and very classy look. Highly recommended
Posted by Unknown on 21st Jul 2016
I was very surprised at how easy it was to apply. The fit was very good, even the little slivets of wood that were intended to go over the face of the bevels along the back of the phone weren't hard to line up. The one problem I've run into is that the veneer around the head phone jack are to close to accept my non standard head phones that are designed to have a 6.35mm trs adapter screed on over it, but otherwise I have no complaints
Thanks for taking the time to review, and sorry for the headphone trouble!
There's A LOT that goes into the design process, and we try to minimize cutouts so the device is covered as much as possible. We always test with the included accessories, but unfortunately there are some pretty bulky ones from third party manufacturers. :(
Posted by Glenn on 14th Jul 2016
I bought a second skin because I decided to change up my older one after I dropped my phone (the skin protected the body of the phone really well, which I was happy about). The new skin was a little easier to apply because Toast now uses less adhesive on the cover by carving out dots of wax paper that remain when you peel off the rest. The sides of the skin folded perfectly over the buttons and the new button covers maintain the same pleasant clickiness of the buttons that the Nexus has without the cover. I would have recommended Toast before, but now I would give it an even stronger recommendation for their responsiveness to customer feedback. My cover also was shipped within a couple days which I appreciated as well.
Posted by skepticalj on 11th Jul 2016
Absolutely love my Toast cover for my Nexus 6P. Very distinctive look, was very easy to put on and never fails to elicit comments from people. I have passed along the website. Well done.
Looks amazing, buttons are an issue.
Posted by dennys on 5th Jul 2016
This looks amazing and works wonderfully, however the volume and power button have come off a few times. Got the power button to stick on but the volume button ripped in half after a few ins and outs of pockets. Wish they'd send replacements or sell invidually. looks amazing
Thank you for the review, and our apologies for the button cover trouble!
If you clean the buttons themselves using the included alcohol wipe prior to applying so they're free of hand oils, this should never be an issue.
We always provide complimentary button covers; just shoot us an email at firstname.lastname@example.org. :)
Qaulity fit, aesthetically superior to cases
Posted by Michael Nanhu on 28th Jun 2016
Beautiful skin for the Nexus 6p. The fit is exceptional and precise. The wood is thin and has a surprisingly grippy feeling. Holding the Nexus with this wood skin is easier to do than with the slippery metal alone. My only disappointment is with the colour I ordered. I ordered the Ebony body and expected a black wood as in the configuration photo but the actual color is a darker brown.
Posted by HARSHILKUMAR V PATEL on 24th Jun 2016
I love this product...
3 months in
Posted by Katie on 17th Jun 2016
I love my toast skin, get tons of compliments. After 3 months not one bit of this has peeled or come unstuck from my phone. Solid. The wood is showing beautiful signs of use, aging very gracefully, like an antique.
I have been having issues with my camera lately - overall crummy pics, and it just occurred to me that it could be the skin not being on perfectly to let all the light into the lens. Have you guys encountered this before? I'm afraid to peel it off to test, in case I can't get it to stay on again once I put it back...
Thank you so much for the lovely review, and sorry to hear about the camera issues!
Our camera cutouts are laser-cut to precision and go right to the edge of the lens, so it should never conflict with performance.
Please feel free to remove for testing purposes, and if you have any issues reapplying, we'll gladly send you a replacement.
You can call us at (503) 206.7398 or email email@example.com.
Thanks again, and hope it remedies itself! :)
Posted by Unknown on 11th Jun 2016
Easy to apply. Case looks good fits great, would highly recommend getting a custom design of your own or one made by toast because I'm my opinion the back is a little dull( my was plain wood)
Showing reviews 1-10 of 106 | Next