LG V10 wood cover


Keep the profile of your LG V10 phone svelte with our ultra-thin, real wood cover! 

Featuring Toast's mind-bogglingly-precise, laser-cut detailing and signature triple hand-rubbed finish, each LG V10 wood cover is a marvel of engineering and design (if we do say so ourselves).  

You get ALL this awesomeness:

  • Back cover
  • Matching side wraps
  • Matching lens ring surround
  • TWO bonus front panels!

Bonus points!

The LG V10 back cover is designed to allow for easy removal of the phone's back panel.

A cinch to apply: just peel, stick, and go! 

Available in ebony, ash, walnut and bamboo.  

All Toast cases feature:

  • Long-lasting, high-quality adhesives
  • Naturally durable, gorgeous materials
  • Responsibly-sourced wood veneers
  • Sleek bump-and-scratch protection  
  • Easy removal without any sticky residue
  • Superb protection against grit that can cause damage when trapped inside typical snap-on phone cases
  • heck of a lot of style!


All Toast products are made to order and crafted by hand  

in beautiful Portland, Oregon, U.S.A.  


Did you know?    

As a member of 1% For The Planet, we donate 1% of our net sales to environmental non-profits.   

 We also plant a tree seedling through Trees For the Future for each product we make -  

because we've only got one beautiful planet and we've got to do our part to take care of it.


Please note: Additional charges for our amazing custom marquetry options (inlaid wood, metallic or colored film pieces) are assessed on a per-piece basis based on size.  Toast logo removal is also available for an extra fee.  Our designers will provide you with an estimate of any additional fees with your computer rendering. 

Have any questions?  Give us a shout and we'll help you out!

Carpe Diem and Carpe Toast!  Because life is short and awesomeness hard to come by.  We’re here to deliver.



LG V10 wood cover Reviews

Based on 9 reviews


Posted by Bryanna on 14th May 2018

I love the look, feel, and had a lot of fun putting this case on, however after about 2 weeks all the corners are starting to break at the "seams" and falling off from regular use. If you want something that's going to look perfect for a long time..this probably isn't it.

Toast Response:

Thanks for the feedback! This falls within the 30 day warranty, and I'll bet the new one on the way treats you better :).

Good, Stylish Case

Posted by Lorenzo on 20th Jul 2016

Shipping was free and quick, which is a good start. Applying it wasn't hard, I'm just not good at it. Once the glue set in it wasn't going to come off easily, which was good. Great case overall

Hi Lorenzo,

Thanks for taking the time to review, and just a heads up - we have a "Butterfingers" replacement policy - just email a pic of the misaligned cover to us at cs@toastmade.com and we'll craft a complimentary replacement! :)

~Team Toast

I enjoyed it

Posted by Jedi on 1st Jul 2016

Well, I received the cover much faster than I assumed which is great. Application was the hardest part of course but it wasn't too challenging. After you place a piece you definitely can remove it to re apply several times before the glue starts setting and after then you can move the cover around on the phone. It has a wonderful feel to it and the amount of people that come to me complimenting me or asking about it is amazing. One gripe I have is that the first couple days with it on and a significant amount of lint builds up. Other than that it is fantastic!

Hi Jedi,

Thanks for the awesome review, and no worries; the lint is temporary! There's a little bit of adhesive exposed around the edges which wears off within a few days of use, and then lint no more. You can also remedy this by wiping the edges with the included alcohol wipe just after install. :)

~Team Toast

Great look but room for improvement

Posted by Jeik on 30th Jun 2016

I'd like to start by saying that the product looks awesome and I would definitely purchase this again for my next phone. I do, however, have some constructive criticism to give.

The first issue is that the front too and bottom plates aren't quite exact to size. The top leaves about a millimetre gap on the edge and the bottom also leaves a gap of about two millimetres from the screen.

I'm not sure if this is a part of the design or I was missing a couple pieces, but on the back cover the top and bottom corners are uncovered. It looks like something could fit there and it would have been nice to have complete continuity of the skin.

As a personal preference, I really like the metal rails on the V10 and would have liked to leave them uncovered, but since the top and bottom pieces overlap onto the rails it makes it a little hard to do so.

This all being said and done, I'm happy with what I have and it definitely beats the bulk of having a case.

Hi Jeik,

Thanks for the detailed review, and just wanted to clarify on the design, as we always try and cover the device in as much wood as possible. :)

The screen cutout on all of our front panels extend ~1mm from the actual display, as not to conflict touchscreen tasks, such as pulling down the hidden notification bar, swiping from the sides of the display, etc.

Those small spaces at top & bottom of the back cover are necessary due to the curvature of the back itself - curves require laser-scored lines to enable the wood to wrap them, and unfortunately this was not enough space for the thin, scored sections of wood to bond - they just wouldn't hold with regular use.

The overlap from the top & bottom wraps are also necessary if you wish to use the side wraps, however you can easily cut them off right at the scorelines and rock the naked rails.

Thanks for reading, and hope you understand! :)

~Team Toast

The wood look

Posted by Manny-D on 27th May 2016

Love the look an have gotten many compliments. NICE to have something custom. That no one else has. Thanks Toast

Looks great and unique.

Posted by Abe on 25th May 2016

The cover for the phone is great. It feels excellent to hold and looks unique!

Unfortunately I have one one complaint, after just two weeks of use the front facing side corners have fallen off already.

I still love the cover and I don't plan on taking it off any time soon.

Hi Abe,

Thanks for the lovely review, and so sorry to hear about the corner issue!

When designing a new cover, we always test with various high grade 3M adhesives to find the perfect match for the materials / textures of the device. Many covers receive a variety of adhesives when a combination of materials are used.

As long as you wipe down the entire device using the included cleaning pad prior to install (especially the corners so they're free of hand oils), peeling should never be an issue.

Please shoot an email to cs@toastmade.com referencing your order and we'll gladly craft you a complimentary replacement! :)

~Team Toast

Great cover. Highly recommended.

Posted by Bader on 15th May 2016

I used this cover for almost 2 weeks now. I love it. I love how it feels in the hands. It can take few drops and actually protect the phone. It is not only for show.
I just have 2 complaints:
1 - The IR blaster is not working with the top cover. While it is cut nicely around the IR port, it seems the blaster needs more room to send out the signal to the TV.
2 - The corners on the stainless steel sides fall off after a week. The design was perfect to cover all sides of the phone but those tiny triangles couldn’t stick after few days of putting the phone in my pocket and removing from my pocket over and over again.

Great product better customer service

Posted by Jon C on 23rd Apr 2016

Love the cover fits great. Easy to install. Had a problem unlocking the phone at about day 2 or 3. Narrowed it down to the cover over the light sensor and speaker so I just removed it. The cover looked so cool that I didn't really care. Without even contacting the company a week and a half later toast sent me out a new revised cover for the section I removed. That's love. Thank you toast. Great job.

Great idea and great products, but the curved sides come off

Posted by Andrew K on 10th Apr 2016

I love the way this wood feels. However after two weeks of use, the top and side bars started to peel off and i lost one of the wood panels. The top parts of the sodes broke off on their own so it is very fragile. I would like the product to be a bit more robust and one that can maintain the hold.

I would like a new set just to get the top piece and replace the side pieces.


Hi there. So sorry to hear your cover didn't meet your expectations and broke :( If you could please email cs@toastmade.com we'd love to send you a replacement cover and make this right!

Thank you!